On this page

Dalbavancin

Prescription ANDA TE AP Official labelling
Informational index, not medical advice. Content is reproduced from public FDA and NLM data. Always confirm against the manufacturer's current prescribing information. Report adverse events to FDA MedWatch.

Overview

Brand name
Dalbavancin
Generic name
Dalbavancin
Dosage form
Injection, Powder, Lyophilized, for Solution
Route
Intravenous
Marketing category
ANDA · ANDA
Labeler
BE Pharmaceuticals Inc.
Product type
Human Prescription Drug
DEA schedule
Not scheduled
Active ingredients
1
NDC product codes
3
Packages
3
Data completeness
76% of corroborating sources present

Active ingredients

Source: NDC Directory
Active ingredients and strengths as listed in the NDC Directory.
Ingredient Strength RxCUI Monograph
Dalbavancin Hydrochloride 500 mg/25mL 1539243 View

Forms, strengths and routes

Source: NDC Directory
Dosage form
Injection, Powder, Lyophilized, for Solution
Route of administration
Intravenous
Presentations
6

Pharmacologic classes are listed in the class section below.

Pharmacologic class

Source: NDC Directory
Established pharmacologic classes (EPC), mechanisms of action (MoA), chemical structures (CS) and physiologic effects (PE).
Class Type Browse
Lipoglycopeptide Antibacterial [EPC] EPC 2 members — no class page
Lipoglycopeptides [CS] CS 2 members — no class page

Regulatory status

Source: Drugs@FDANDC Directory
Application number
219604
Application type
ANDA · Abbreviated New Drug Application
Approval date
June 4, 2026
Sponsor
BE PHARMS
Products on application
1
Submissions recorded
1
Products approved under application 219604.
Product Trade name Form Strength Ingredient Status TE Flags
219604-001 DALBAVANCIN HYDROCHLORIDE POWDER DALBAVANCIN HYDROCHLORIDE Prescription AP

Therapeutic equivalence

Source: Orange Book
TE code
AP
Reference Listed Drug
No
Reference Standard
No

What this rating means: Therapeutically equivalent — bioequivalence demonstrated (parenteral aqueous solutions)

Codes beginning with “A” indicate products the FDA considers therapeutically equivalent. Codes beginning with “B” indicate bioequivalence has not been established. See methodology.

Approval history

Source: Drugs@FDA
Most recent submissions on application 219604.
Type No. Action Status Date Review
Original application 1 Approved June 4, 2026 Standard

Prescribing information

Source: openFDA Drug Labeling

Reproduced verbatim from the Structured Product Labeling submitted to the FDA (effective 20260612). This is the manufacturer's labelling text, not a summary and not advice.

HUMAN PRESCRIPTION DRUG · 20260612 HUMAN PRESCRIPTION DRUG · 20251203

Indications and Usage

openFDA Drug Labeling

1 INDICATIONS AND USAGE Dalbavancin for Injection is a lipoglycopeptide antibacterial indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of Gram-positive microorganisms. ( 1.1 ) To reduce the development of drug-resistant bacteria and maintain the effectiveness of Dalbavancin for Injection and other antibacterial drugs, Dalbavancin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. ( 1.2 ) 1.1 Acute Bacterial Skin and Skin Structure Infections Dalbavancin for Injection is indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of the following Gram-positive microorganisms: Staphylococcus aureus (including methicillin-susceptible and methicillin-resistant isolates), Streptococcus pyogenes , Streptococcus agalactiae , Streptococcus dysgalactiae , Streptococcus anginosus group (including S. anginosus , S. intermedius , S . constellatus ) and Enterococcus faecalis (vancomycin susceptible isolates). 1.2 Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of Dalbavancin for Injection and other antibacterial agents, Dalbavancin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

Dosage and Administration

openFDA Drug Labeling

2 DOSAGE AND ADMINISTRATION Dosage in Adult Patients ( 2.1 , 2.3 ): Estimated Creatinine Clearance ( C L cr) Single- Dose Regimen 30 mL/min and above or on regular hemodialysis 1,500 mg Less than 30 mL/min and not on regular hemodialysis 1,125 mg Administer by intravenous infusion over 30 minutes ( 2.1 , 2.4 ) See Full Prescribing Information for instructions on reconstitution of lyophilized powder and preparation of injection ( 2.4 ) Dosage in Pediatric Patients with CLcr 30 mL/min/1.73m 2 and above ( 2.2 ) Age Range Dosage (Single-Dose Regimen) Birth to less than 6 years 22.5 mg/kg (maximum of 1,500 mg) 6 to less than 18 years 18 mg/kg (maximum of 1,500 mg) Dosage adjustment in pediatric patients with CLcr less than 30 mL/min has not been studied. 2.1 Recommended Dos ag e Regimen in Adult Patients with CLcr 30 mL/min and Above The recommended dosage regimen of dalbavancin for injection in adult patients with CLcr 30 mL/min and above is 1,500 mg, administered as a single-dose regimen. Administer dalbavancin for injection over 30 minutes by intravenous infusion. For adult patients with CLcr less than 30 mL/min, dosage adjustment is required [see Dosage and Administration ( 2.3 ) and Clinical Pharmacology ( 12.3 ) ] . 2.2 Recommended Dosage Regimen in Pediatric Patients with CLcr 30 mL/min/ 1.73m 2 and Abov e The recommended dosage regimen of dalbavancin for injection in pediatric patients with CLcr 30 mL/min/1.73m 2 and above is a single-dose regimen based on the age and weight of the pediatric patient ( Table 1 ). Administer dalbavancin for injection over 30 minutes by intravenous infusion. There is insufficient information to recommend dosage adjustment for pediatric patients younger than 18 years with CLcr less than 30 mL/min/1.73m 2 [see Use in Specific Populations ( 8.4 ) and Clinical Pharmacology ( 12.3 )] . Table 1. Dosage of Dalbavancin for Injection in Pediatric Patients with CLcr* 30 mL/min/1.73m 2 and above Age Range Dosage (Single-Dose Regimen) Birth to less than 6 years 22.5 mg/kg (maximum 1,500 mg) 6 to less than 18 years 18 mg/kg (maximum 1,500 mg) *Estimate CLcr or glomerular filtration rate (GFR) using an age-appropriate equation accepted for pediatric patients (birth to less than 18 years old) to define renal function impairment. 2.3 Dosage Adjustments in Adult Patients with CLcr less than 30 mL/min In adult patients with renal impairment whose known CLcr is less than 30 mL/min and who are not receiving regularly scheduled hemodialysis, the recommended dosage regimen of dalbavancin for injection is 1,125 mg, administered as a single-dose regimen. No dosage adjustment is recommended for adult patients receiving regularly scheduled hemodialysis, and dalbavancin for injection can be administered without regard to the timing of hemodialysis [see Use in Specific Populations ( 8.6 ) and Clinical Pharmacology ( 12.3 )] . 2.4 Preparation and Administration Dalbavancin for injection must be reconstituted with either Sterile Water for Injection, USP, or 5% Dextrose Injection, USP, and subsequently diluted only with 5% Dextrose Injection, USP, to a final concentration of 1 mg per mL to 5 mg per mL. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Reconstitution Dalbavancin for injection must be reconstituted under aseptic conditions, using 25 mL of either Sterile Water for Injection, USP, or 5% Dextrose Injection, USP, for each 500 mg vial. To avoid foaming, alternate between gentle swirling and inversion of the vial until its contents are completely dissolved. Do not shake. The reconstituted vial contains 20 mg per mL dalbavancin as a clear, colorless to yellow solution. Reconstituted vials may be stored either refrigerated at 2° to 8°C (36° to 46°F), or at controlled room temperature 20° to 25°C (68° to 77°F). Do not freeze. Dilution Adult Patients Aseptically transfer the required dose of reconstituted dalba …

Dosage Forms and Strengths

openFDA Drug Labeling

3 DOSAGE FORMS AND STRENGTHS Dalbavancin for Injection is supplied as a white/off-white to pale yellow lyophilized sterile powder for reconstitution in a single-dose clear glass vial containing dalbavancin hydrochloride equivalent to 500 mg of dalbavancin . For injection: 500 mg of lyophilized powder in a vial for reconstitution ( 3 )

Contraindications

openFDA Drug Labeling

4 CONTRAINDICATIONS Dalbavancin for injection is contraindicated in patients with known hypersensitivity to dalbavancin. Known hypersensitivity to dalbavancin ( 4 )

Warnings and Cautions

openFDA Drug Labeling

5 WARNINGS AND PRECAUTIONS Serious hypersensitivity (anaphylactic) and skin reactions have been reported in patients treated with dalbavancin for injection. If an allergic reaction occurs, discontinue treatment with dalbavancin for injection and institute appropriate therapy for the allergic reaction. Carefully monitor patients with known hypersensitivity to glycopeptides. ( 5.1 ) Rapid intravenous infusion of dalbavancin for injection can cause flushing of the upper body, urticaria, pruritus, rash, and/or back pain. Stopping or slowing the infusion may result in cessation of these reactions. ( 5.2 ) Alanine Aminotransferase (ALT) elevations with dalbavancin for injection treatment were reported in clinical trials. ( 5.3 , 6.1 ) Clostridioides difficile -associated diarrhea (CDAD) has been reported with nearly all systemic antibacterial agents, including dalbavancin for injection. Evaluate if diarrhea occurs. ( 5.4 ) 5.1 Hypersensitivity Reactions Serious hypersensitivity (anaphylactic) and skin reactions have been reported in patients treated with dalbavancin for injection. If an allergic reaction to dalbavancin for injection occurs, discontinue treatment with dalbavancin for injection and institute appropriate therapy for the allergic reaction. Before using dalbavancin for injection, inquire carefully about previous hypersensitivity reactions to other glycopeptides. Due to the possibility of cross-sensitivity, carefully monitor for signs of hypersensitivity during treatment with dalbavancin for injection in patients with a history of glycopeptide allergy [see Patient Counseling Information ( 17 )] . 5.2 Infusion - Related Reactions Dalbavancin for injection is administered via intravenous infusion, using a total infusion time of 30 minutes to minimize the risk of infusion-related reactions. Rapid intravenous infusions of dalbavancin for injection can cause flushing of the upper body, urticaria, pruritus, rash, and/or back pain. Stopping or slowing the infusion may result in cessation of these reactions. 5.3 Hepatic Effects In Phase 2 and 3 clinical trials, more dalbavancin for injection than comparator-treated subjects with normal baseline transaminase levels had post-baseline alanine aminotransferase (ALT) elevation greater than 3 times the upper limit of normal (ULN). Overall, abnormalities in liver tests (ALT, AST, bilirubin) were reported with similar frequency in the dalbavancin for injection and comparator arms [see Adverse Reactions ( 6.1 )]. 5.4 Clostridioides difficile - Associated Diarrhea Clostridioides difficile -associated diarrhea (CDAD) has been reported in users of nearly all systemic antibacterial drugs, including dalbavancin for injection, with severity ranging from mild diarrhea to fatal colitis. Treatment with antibacterial agents can alter the normal flora of the colon, and may permit overgrowth of C. difficile . C . difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin-producing strains of C . difficile cause increased morbidity and mortality, as these infections can be refractory to antibacterial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibacterial use. Careful medical history is necessary because CDAD has been reported to occur more than 2 months after the administration of antibacterial agents. If CDAD is suspected or confirmed, ongoing antibacterial use not directed against C . difficile should be discontinued, if possible. Appropriate measures such as fluid and electrolyte management, protein supplementation, antibacterial treatment of C . difficile , and surgical evaluation should be instituted as clinically indicated. 5.5 Development of Drug-Resistant Bacteria Prescribing dalbavancin for injection in the absence of a proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of the development of drug-re …

Adverse Reactions

openFDA Drug Labeling

6 ADVERSE REACTIONS The following clinically significant adverse reactions are also discussed elsewhere in the labeling: Hypersensitivity Reactions [see Warnings and Precautions (5.1) ] Infusion Related Reactions [see Warnings and Precautions (5.2) ] Hepatic Effects [see Warnings and Precautions (5.3) ] Clostridioides difficile-associated Diarrhea [see Warnings and Precautions (5.4) ] The most common adverse reactions occurring in >4% of adult patients treated with dalbavancin for injection were nausea, headache, and diarrhea. The most common adverse reaction that occurred in >1% of pediatric patients was pyrexia. (6.1) To report SUSPECTED ADVERSE REACTIONS, contact BE Pharmaceuticals Inc. at 1-877-648-9517 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in clinical trials of dalbavancin for injection cannot be directly compared to rates in the clinical trials of another drug and may not reflect rates observed in practice. Clinical Trials Experience in Adult Patients Adverse reactions were evaluated for 2,473 patients treated with dalbavancin for injection: 1,778 patients were treated with dalbavancin for injection in seven Phase 2/3 trials comparing dalbavancin for injection to comparator antibacterial drugs and 695 patients were treated with dalbavancin for injection in one Phase 3 trial comparing dalbavancin for injection single dose and another dalbavancin dosing regimens. The median age of patients treated with dalbavancin for injection was 48 years, ranging between 16 and 93 years. Patients treated with dalbavancin for injection were predominantly male (59.5%) and White (81.2%). Serious Adverse Reactions and Adverse Reactions Leading to Discontinuation Serious adverse reactions occurred in 121/2,473 (4.9%) of patients treated with any regimen of dalbavancin for injection. In the Phase 2/3 trials comparing dalbavancin for injection to comparator, serious adverse reactions occurred in 109/1,778 (6.1%) of patients in the dalbavancin for injection group and 80/1,224 (6.5%) of patients in the comparator group. In a Phase 3 trial comparing dalbavancin for injection single dose and another dalbavancin dosing regimen, serious adverse reactions occurred in 7/349 (2%) of patients in the dalbavancin for injection single dose group and 5/346 (1.4%) of patients in another dalbavancin for injection dosing regimen group. Dalbavancin for injection was discontinued due to an adverse reaction in 64/2,473 (2.6%) patients treated with any regimen of dalbavancin for injection. In the Phase 2/3 trials comparing dalbavancin for injection to comparator, dalbavancin for injection was discontinued due to an adverse reaction in 53/1,778 (3.0%) of patients in the dalbavancin for injection group and 35/1,224 (2.9%) of patients in the comparator group. In a Phase 3 trial comparing dalbavancin for injection single dose and another dalbavancin dosing regimen, dalbavancin for injection was discontinued due to an adverse reaction in 6/349 (1.7%) of patients in the dalbavancin for injection single dose group and 5/346 (1.4%) of patients in another dalbavancin dosing group. Most Common Adverse Reactions The most common adverse reactions in patients treated with dalbavancin for injection in Phase 2/3 trials were nausea (5.5%), headache (4.7%), and diarrhea (4.4%). The median duration of adverse reactions was 3.0 days in patients treated with dalbavancin for injection. In the Phase 2/3 trials comparing dalbavancin for injection to comparator, the median duration of adverse reactions was 3.0 days for patients in the dalbavancin for injection group and 4.0 days in patients in the comparator group. In a Phase 3 trial comparing dalbavancin for injection single dose and another dalbavancin dosing regimens, the median duration of adverse reactions was 3.0 days for patients in the dalbavancin for injection single dose and another d …

Drug Interactions

openFDA Drug Labeling

7 DRUG INTERACTIONS 7.1 Drug-Laboratory Test Interactions Drug-laboratory test interactions have not been reported. Dalbavancin for injection at therapeutic concentrations does not artificially prolong prothrombin time (PT) or activated partial thromboplastin time (aPTT). 7.2 Drug-Drug Interactions No clinical drug-drug interaction studies have been conducted with dalbavancin for injection. There is minimal potential for drug-drug interactions between dalbavancin for injection and cytochrome P450 (CYP450) substrates, inhibitors, or inducers [see Clinical Pharmacology (12.3) ].

Use in Specific Populations

openFDA Drug Labeling

8 USE IN SPECIFIC POPULATIONS 8.1 Pregnancy Risk Summary There are no adequate and well-controlled studies with dalbavancin for injection use in pregnant women to evaluate for a drug-associated risk of major birth defects, miscarriage or adverse developmental outcomes. No treatment-related malformations or embryo-fetal toxicity were observed in pregnant rats or rabbits at clinically relevant exposures of dalbavancin. Treatment of pregnant rats with dalbavancin at 3.5 times the human dose on an exposure basis during early embryonic development and from implantation to the end of lactation resulted in delayed fetal maturation and increased fetal loss, respectively [see Data]. The estimated background risk of major birth defects and miscarriage for the indicated population is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2% to 4% and 15% to 20%, respectively. Data Animal Data No evidence of embryo or fetal toxicity was found in the rat or rabbit at a dose of 15 mg/kg/day (1.2 and 0.7 times the human dose on an exposure basis, respectively). Delayed fetal maturation was observed in the rat at a dose of 45 mg/kg/day (3.5 times the human dose on an exposure basis). In a rat prenatal and postnatal development study, increased embryo lethality and increased offspring deaths during the first week post-partum were observed at a dose of 45 mg/kg/day (3.5 times the human dose on an exposure basis). 8.2 Lactation Risk Summary There are no data on the presence of dalbavancin or its metabolite in human milk, the effects on the breast-fed child, or the effects on milk production. Dalbavancin is excreted in the milk of lactating rats. When a drug is present in animal milk, it is likely that the drug will be present in human milk. The developmental and health benefits of breastfeeding should be considered along with the mother’s clinical need for dalbavancin for injection and any potential adverse effects on the breast-fed child from dalbavancin for injection or from the underlying maternal condition. 8.4 Pediatric Use The safety and effectiveness of dalbavancin for injection for the treatment of ABSSSI has been established in pediatric patients aged birth to less than 18 years. Use of dalbavancin for injection for this indication is supported by evidence from adequate and well-controlled studies in adults with additional pharmacokinetic and safety data in pediatric patients aged birth to less than 18 years [see Adverse Reactions (6.1), Clinical Pharmacology (12.3), and Clinical Studies (14.1) ]. There is insufficient information to recommend dosage adjustment for pediatric patients with ABSSSI and CLcr less than 30 mL/min/1.73m 2 [see Dosage and Administration (2.2) ]. 8.5 Geriatric Use Of the 2,473 patients treated with dalbavancin for injection in Phase 2 and 3 clinical trials, 403 patients (16.3%) were 65 years of age or older. The efficacy and tolerability of dalbavancin for injection were similar to comparator regardless of age. The pharmacokinetics of dalbavancin for injection was not significantly altered with age; therefore, no dosage adjustment is necessary based on age alone. Dalbavancin for injection is substantially excreted by the kidney, and the risk of adverse reactions may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection in this age group. 8.6 Renal Impairment In patients with renal impairment whose known CLcr is less than 30 mL/min and who are not receiving regularly scheduled hemodialysis, the recommended regimen for dalbavancin for injection is 1,125 mg, administered as a single dose. No dosage adjustment is recommended for patients receiving regularly scheduled hemodialysis, and dalbavancin for injection can be adminis …

Mechanism of Action

openFDA Drug Labeling

12.1 Mechanism of Action Dalbavancin is an antibacterial drug [see Microbiology ( 12.4 )] .

Description

openFDA Drug Labeling

11 DESCRIPTION Dalbavancin for Injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species. Dalbavancin is a mixture of five closely related active homologs (A 0 , A 1 , B 0 , B 1 , and B 2 ); the component B 0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R 1 ) structure and/or the presence of an additional methyl group (R 2 ) on the terminal amino group (shown in the Figure 1 and Table 3 below). Figure 1. Dalbavancin Structural Formula Table 3. Substitution Patterns for Dalbavancin API Homologs Dalbavancin R 1 R 2 Molecular Formula Molecular Weight * A 0 CH(CH 3 ) 2 H C 87 H 98 N 10 O 28 Cl 2 · 1.6 HCl 1,802.7 A 1 CH 2 CH 2 CH 3 H C 87 H 98 N 10 O 28 Cl 2 · 1.6 HCl 1,802.7 B 0 CH 2 CH(CH 3 ) 2 H C 88 H 100 N 10 O 28 Cl 2 · 1.6 HCl 1,816.7 B 1 CH 2 CH 2 CH 2 CH 3 H C 88 H 100 N 10 O 28 Cl 2 · 1.6 HCl 1,816.7 B 2 CH 2 CH(CH 3 ) 2 CH 3 C 89 H 102 N 10 O 28 Cl 2 · 1.6 HCl 1,830.7 *Anhydrous free base The B 0 INN chemical name is: 5,31-dichloro-38-de(methoxycarbonyl)-7-demethyl-19-deoxy-56-O-[2-deoxy-2-[(10-methylundecanoyl)amino]-β-D-glucopyranuronosyl]-38-[[3-(dimethylamino)propyl] carbamoyl]-42-O-α-D-mannopyranosyl-15-N-methyl(ristomycin A aglycone) hydrochloride. Dalbavancin for Injection is supplied in clear glass vials as a sterile, lyophilized, preservative-free, white to off-white to pale yellow solid. Each vial contains dalbavancin HCl equivalent to 500 mg of dalbavancin as the free base, plus lactose monohydrate (129 mg) and mannitol (129 mg) as excipients. Sodium hydroxide or hydrochloric acid may be added to adjust the pH at the time of manufacture. The powder is to be reconstituted and further diluted for IV infusion [ see Dosage and Administration ( 2.4 ) , How Supplied/Storage and Handling ( 16 ) ] . Figure 1

10 OVERDOSAGE Specific information is not available on the treatment of overdose with dalbavancin for injection, as dose-limiting toxicity has not been observed in clinical studies. In Phase 1 studies, healthy volunteers have been administered cumulative doses of up to 4,500 mg over a period of up to 8 weeks (not an approved dosing regimen), with no signs of toxicity or laboratory results of clinical concern. Treatment of overdose with dalbavancin for injection should consist of observation and general supportive measures. Although no information is available specifically regarding the use of hemodialysis to treat overdose, in a Phase 1 study in patients with renal impairment less than 6% of the recommended dalbavancin dose was removed [see Clinical Pharmacology (12.3)] .

How Supplied / Storage and Handling

openFDA Drug Labeling

16 HOW SUPPLIED/STORAGE AND HANDLING Dalbavancin for Injection is a white to off-white to pale yellow sterile lyophilized powder in a single-dose glass vial containing dalbavancin hydrochloride equivalent to 500 mg dalbavancin and supplied as follows: NDC Dalbavancin for Injection (500 mg per vial) Package Factor 71288- 034 -50 500 mg Single-Dose Vial 1 vial per carton Dalbavancin for Injection should be stored at 25oC (77oF); excursions permitted to 15o to 30oC (59o to 86oF) [see USP Controlled Room Temperature]. Storage of the reconstituted and diluted solutions of Dalbavancin for Injection are described elsewhere in the prescribing information [see Dosage and Administration ( 2.4 )]. Sterile, Nonpyrogenic, Preservative-free. The container closure is not made with natural rubber latex.

Adverse event reports

Source: openFDA FAERS
443
FAERS reports mentioning this drug
as of 2026-09-25T03:42:24+00:00
A report count is not a risk measure. FAERS accepts voluntary and mandatory reports without establishing causation, and reporting is influenced by how widely a drug is used, how long it has been marketed, and media attention. FDA states that reports “do not prove that the drug caused the event”. Compare rates, not totals.

Attributed to this product's most-reported active ingredient: DALBAVANCIN HYDROCHLORIDE. Combination products with more than six active ingredients are not attributed, because a report count summed across a long ingredient list measures the list, not the medicine.

Packaging and NDCs

Source: NDC Directory
Every National Drug Code package associated with this medication. The NDC is the identifier used for dispensing, billing and pharmacovigilance in the United States.
Package NDC Product NDC Labeler Description Marketing start
71839-144-01 71839-144 BE Pharmaceuticals Inc. 1 VIAL in 1 CARTON (71839-144-01) / 25 mL in 1 VIAL June 12, 2026
71288-034-50 71288-034 Meitheal Pharmaceuticals Inc 1 VIAL, SINGLE-DOSE in 1 CARTON (71288-034-50) / 25 mL in 1 VIAL, SINGLE-DOSE November 26, 2025
70069-830-01 70069-830 Somerset Therapeutics, LLC 1 VIAL in 1 CARTON (70069-830-01) / 25 mL in 1 VIAL July 27, 2026
71839-144 71839-144 BE Pharmaceuticals Inc. — June 12, 2026
71288-034 71288-034 Meitheal Pharmaceuticals Inc — November 26, 2025
70069-830 70069-830 Somerset Therapeutics, LLC — July 27, 2026

Sources for this page

Every dataset that contributed a fact to this page.
Dataset Agency Used for
NDC Directory FDA Identity, ingredients, strengths, forms, routes, labelers, packages
Drugs@FDA FDA Application, sponsor, submissions, review documents, marketing status
Orange Book FDA Therapeutic equivalence codes, reference drug flags, patents, exclusivity
Drug Labeling FDA / NLM Prescribing information reproduced above
FAERS FDA Adverse event report counts

Generated September 25, 2026 · 12 sections on this page.